Arcstar 500cv
ARCSTAR 500CV is a high performance welder which can handle both MIG / CO2 Welding Processes with excellent ARC characteristics. The machine operates at very high power factor & efficiency.
Salient Features :
Specification
In view of continuous development, Sur Iron reserves the right to modify / after the design and/or specification without any prior notice
- High Frequency IGBT based i.e. Low Power Consumption
- Excellent Arc Stability
- 2 Track/4 Track option for MIG/MAG process i.e. Less fatigue for operation to hold torch switch for long hours.
- Crater Current / Crater voltage control for 4 track MIG/MAG Process i.e. Ideal for crater filling.
- Light weight with wheels i.e. Easy portability
| INPUT | ||
|---|---|---|
| Input Supply Voltage | 415V ± 10%, 3ph, 50 Hz | |
| KVA | 25 (max) | |
| Power Factor | >0.9 | |
| Efficiency | 85% |
| MIG/MAG – CV Mode | ||
|---|---|---|
| Current Range | 40-500 Amp. | |
| Load Voltage | 15-40V | |
| Crater Current | 30% to 100% of Set Current | |
| Crater Voltage | Adjustable Upto Set Voltage | |
| Current 100% duty cycle | 400 Amp. | |
| Current 60% duty cycle | 500 Amp. |
| WIRE FEEDER | ||
|---|---|---|
| Wire Size | 1.2 mm/1.6 mm solid (flux cored) | |
| Wire Feed Speed | 1.5 to 20 meter/min |
| General | ||
|---|---|---|
| Weight | 60 kg(approx.) | |
| Enclosure | IP-23 | |
| Insulation | Class H | |
| Cooling | Forced Air |
In view of continuous development, Sur Iron reserves the right to modify / after the design and/or specification without any prior notice