Magicweld YD /YDE

ENGINE DRIVEN WELDER MAGIC WELD 200 YD CHOPPER TECHNOLOGYENGINE DRIVEN WELDER MAGIC WELD 200 YD CHOPPER TECHNOLOGY
  • Arc welding source in D.C. welding
  • Welds any type of electrodes, including cellulosic
  • High frequency control of welding current and voltage
  • MOSA Power optimiser (patent pending)
  • High performing Permanent Magnets Alternator
  • Inverter generated single-phase 50Hz auxiliary output
  • Yanmar, air cooled, diesel engine
  • Very compact design within protective frame
  • Wheels and handles (optional)
  • Meets EC directives
Standard Equipment Standard_Equipment_03
Options on request
  • 230V plug
  • Remote control RC2 – RC2/90 (cable 20m)
  • Welding cables: K185 (4.5+3m, 35mm2), K190 (10+8m, 35mm2), K 200 (20+15m, 35mm2)
  • Welding parallel cables K 2×150 (35mm )
  • Manual trolley TRM-MW200 (n. 4 foldable handles)
  • Manual trolley CTM-MW200
Version on request
  • Auxiliary output 230V a.c.: 1x230V 16A 2P+T CEE
  • Auxiliary output 230V a.c.: 1x230V 16A 2P+T schuko
  • Auxiliary output 110V 50Hz
  • Auxiliary output 110V 60Hz
Technical Data Magic Weld 200YD
D.C. WELDING (Costant Current)
Current range 20 200 A
Open circuit voltage 70 V
Duty cycle 170 A – 60%
A.C. GENERATION 50Hz Permanent magnets alternator, self-excited, brushless
Single-phase generation (max) 3.3 kVA / 230 V / 14.3 A
Single-phase generation (continuous) 3 kVA / 230 V / 13 A
Insulating class H
ENGINE Diesel 4-stroke, direct injection, air cooled
Model Yanmar L70N
* Output 4.9 kW (6.7 HP)
Speed 3600 rpm
Cylinders / Displacement 1/ 320 cm 3
Fuel consumption (welding 60%) 1.0 l/h
Maximum output (not overloadable) according to SAE J1349
GENERAL SPECIFICATIONS
Tank capacity 3.3 l
Running time (Welding 60%) 3.3 h
IP protection degree IP 23
Dimensions Lxwxh (mm) 630x490x540
* Dry weight 72 kg
** Acoustic power LwA (pressure LpA) 103 dB(A) (78 dB(A) @ 7 m)
* Dimensions and weight without trolley/trailer. ** For fi xed installation only.
Mosa reserves the right to change this specifi cation without notice. For further information please contact the sales department.
  • Arc welding source in D.C. welding
  • Welds any type of electrodes, including cellulosic
  • High frequency control of welding current and voltage
  • MOSA power optimizer (patent Pending)
  • High performing Permanent Magnet Alternator
  • Inverter generated single phase 50 Hz auxiliary output
  • Yanmar, air cooled, diesel engine
  • Economizer (Auto Idle)
  • Electric Starter
  • Low oil pressure automatic engine shut down
  • Very compact design within protective frame
  • Wheels and handles (optional)
  • Meets EC directives
Technical data MAGIC WELD 200 YDE
D.C. WELDING (Costant Current)
Current range 20 – 200 A
Duty cycle 170 A – 60%
Open circuit voltage 70 V
AC GENERATION – 50Hz Permanent Magnets Alternators, self-excited, Brushless
Single-phase power (max) 3.3kVA / 230V / 14.3 A
Single-phase power (continuous) 3 kVA / 230V / 13 A
Insulation class H
ENGINE Diesel 4-stroke, direct injection, air cooled
Model Yanmar L70N
*Output 4.9 kW (6.7 HP)
Speed 3600rpm
Cylinders / Displacement 1 / 320 cm3
Fuel consumption (welding 60%) 1.0 l/h
*maximum output (not overloadable) according to SAE J1349
GENERAL SPECIFICATION
Tank capacity 3.3 l
Running time (Welding 60%) 3.3 h
IP protection degree IP 23
*Dimension Lxlxh (mm) 630x490x540
*Dry weight 91 kg
**Acoustic power LwA (pressure LpA) 103 db(A) (78dB(A) @7 m)
Mosa deserves the right to change this specification without notice. For further information, please contact the sales department.