Roller Bed

Features:
  • Sturdy design
  • AC Drive
  • Remote Control Pendant, FOR/REV/STOP Switch & Speed Control Knob.
  • Specially designed Fabricated Gearbox for withstanding Shock Load
  • Easy Dismantling
  • Soft Start & Dynamic Braking
  • Choice of Steel or PU (Hardness Shore 90) Rollers
TECHNICAL SPECIFICATION (Dimensions may vary in the actual construction)
Load capacity (1power + 1idler 15 Toned 20 Toned 30 Toned 40 Tones 50 Tones 80 Tones 100 Tones
Turning Capacity 15 Tones 20 Tones 30 Tones 40 Tones 50 Tones 80 Tones 100 Tones
Job Diameter 100-4500 mm 100-4500 mm 100-4500 mm 100-4500 mm 100-6000 mm 100-6000 mm 100-6000 mm
Wheel Material Steel or PU Steel or PU Steel or PU Steel or PU Steel or PU Steel Steel
Wheel Diameter 400 mm 400 mm 420 mm 500 mm 500 mm 600 mm 600 mm
Wheel Face Width (Steel) 150 mm 180 mm 220 mm 250 mm 300 mm 350 mm 350 mm
Wheel Face Width (PU) 180 mm 250 mm 300 mm 400 mm 500 mm
Wheel Centre Dist (Max) (Min) 2450 mm 600 mm 2450 mm 600 mm 2450 mm 600 mm 2450 mm 600 mm 3250 mm 600 mm 3300 mm 600 mm 3300 mm 600 mm
Wheel Surfaced Speed Range 100-1200 mm/min 100-1200 mm/min 100-1200 mm/min 100-1200 mm/min 100-1200 mm/min 100-1200 mm/min 100-1200 mm/min
Total Width- Power Un Total Width- Idler Uni (For steel Wheel) 840 mm 540 mm 910 mm 610 mm 910 mm 610 mm 980 mm 680 mm 1100 mm 700 mm 1270 mm 870 mm 1300 mm 900 mm
Total Width- Power Un Total Width- Idler Uni (For PU Wheel) 840 mm 540 mm 910 mm 610 mm 910 mm 610 mm 980 mm 680 mm 1150 mm 750 mm
Overall Height, APPR 640 mm 690 mm 690 mm 800 mm 860 mm 910 mm 910 mm
Speed Control AC Frequency Drive AC Frequency Drive AC Frequency Drive AC Frequency Drive AC Frequency Drive AC Frequency Drive AC Frequency Drive
Remote Pendant Inter Conn. Cable Length 15 m 15 m 15 m 15 m 15 m 15 m 15 m
Center Distance Adjustment By Lead Screw Manual By Lead Screw Manual By Lead Screw Manual By Lead Screw Manual By Lead Screw Manual By Lead Screw Manual By Lead Screw Manual

In view of continuous development, Sur Iron reserves the right to modify/ after the design and/or specification without a prior notice.

Error 404 - Page not found!

Error 404 - Not Found

The requested file or directory was not found!

This may be due to the following reasons:-

  1. The page or directory has recently been moved or renamed.

  2. The page or directory is temporarily not avaliable.

  3. The address to this content may not be correct, please check the address and try again.

  4. Try using the browser's back button and try a different link.

If you believe you are getting this error message by mistake, please contact the website administrator.

 

Error message generated by Apache & ZPanel Hosting Panel.

Powered by ZPanel - Taking hosting to the next level.