• Arc welding source in D.C. welding
  • Electronic regulation of welding current
  • A.C. generator, single-phase and three-phase
  • Aux power also available while welding
  • Ground fault interrupter
  • Output Sockets: 1x400V 16A 3P+N+T CEE – 1x230V 16A 2P+T CEE – 1x48V 32A 2P CEE
  • LOMBARDINI diesel engine
  • Electric starter
  • Protective frame
  • Manual trolley CTM222 (on request)
  • Welding remote control (on request)
  • Meets EC directives
Standard Equipment Standard_Equipment
Options on request
  • Plug 400V
  • Plug 230V
  • Plug 48V
  • Welding cables: K190 (10+8m, 35mm2) K200 (20+15m, 35mm2)
  • Remote control: TC2 (cable 20m) – TC2/50 (cable 50m)
  • Welding kit (mask, gloves, etc.)
  • Earthing kit
  • Manual trolley CTM222
Factory installation option Hour-meter
Technical Data TS 250 D/EL
D.C. WELDING (Costant Current)
Current range, continuous 20A / 250A
Service 250A 35% – 200A 60%
Duty cycle 70 V
D.C. GENERATION – 50Hz Three-phase asyncronous alternator, self-regulated, self-excited, brushless
Three-phase generation 6.5 kVA / 400 V / 9.4 A
Single-phase generation 4.5 kVA / 230 V / 19.5 A
Single-phase generation 2 kVA / 48 V / 41.6 A
Booster – Engine starting device 200A / 12Vc.c. – 24Vc.c.
Insulating class H
ENGINE Diesel, 4-stroke, direct injection, air cooled
Model Lombardini 12LD 477/2
* Output 14.9 kW (20.3 HP)
Speed 3000 rpm
Cylinders / Displacement 954 cm3 / 2
Fuel consumption(welding 60%) 1.7 l/h
* * Maximum output (not overloadable) according to ISO 3046-1
Tank capacity 9 l
Running time (at duty cycle 60%) 5.3 h
IP protection degree IP 23
Dimensions Lxwxh (mm)* 1050x530x630
Dry Weight * 175 kg
** Acoustic power LwA (pressure LpA) 103 dB(A)(78 dB(A) @ 7m)
* Values shown do not include trolleys. ** For fixed installation only
Mosa reserves the right to change this specification without notice. For further information please contact the sales department
Error 404 - Page not found!

Error 404 - Not Found

The requested file or directory was not found!

This may be due to the following reasons:-

  1. The page or directory has recently been moved or renamed.

  2. The page or directory is temporarily not avaliable.

  3. The address to this content may not be correct, please check the address and try again.

  4. Try using the browser's back button and try a different link.

If you believe you are getting this error message by mistake, please contact the website administrator.


Error message generated by Apache & ZPanel Hosting Panel.

Powered by ZPanel - Taking hosting to the next level.