XD-350/500

Model name | XD350S | XD500S | ||
Model Number | type | CPXDS-350 | CPXDS-500 | |
Rated Input Voltage | V |
Specify primary voltage while ordering |
||
Phases |
3ph |
|||
Rated Frequency | Hz |
50/60Hz |
||
Rated Input Power | kVA | 18.5 kVA (14.5 kW) | 31 kVA (26.0 kW) | |
Rated Output Current | A | 350 | 500 | |
Rated Load Voltage | V | 31.5 | 39 | |
Max, Open Circuit Voltage | V | 55 | 65 | |
Output Current range | A | 50 – 350 | 50 – 500 | |
Output voltage Range | V | 16.5 – 31.5 | 16.5 – 39 | |
Rated Duty Cycle | % | 50 | 60 | |
Dimension (WXDXH) | mm | 343X635X732 | 420X625X850 | |
Weight | Kg | 116 | 162 | |
Wire Feeder | type |
CMXL-2302 |
||
Applicable Wire Size | mm |
(0.8), (0.9), (1.0), (1.2), (1.4), (1.6) |
||
Wire Type |
Solid Wire, Flux-cored Wire |
|||
Wire feeding Speed | m/min |
1.5 – 20 |
||
Weight | Kg |
10 |
||
Dimension (WXDXH) | mm |
200X440X292 |
||
CO2/MAG Welding Torch | type | WT3500-SD | WT3510-SD | WT5000-SD |
Rated Current | A |
350 |
500 | |
Applicable Wire Size | mm | (0.9), (1.0), (1.2) | (0.9), (1.0), (1.2), (1.4), (1.6) | (1.2), (1.4),(1.6) |
Duty cycle | % | 30 |
60 |
|
Cooling Method |
Air Cooled |
|||
Cable Length | m |
3, (4.5), (6) |
||
Base Metal Side Cable | type |
BKPT-3802 |
BKPT-6002 | |
Cable length | m | 2 | 2 | |
Cable Cross section area | Mm2 | 38 | 60 |
Standard Accessories
Model Name | XD350S | XD500S | Amount |
Remote Control Box | P25000K00 | P25010K00 | 1 |
Fuse | 10A 250V | 10A 250V | 1 |
5A 250V | 5A 250V | 1 | |
3A 250V | 3A 250V | 1 | |
4A 500V | 4A 500V | 1 | |
Screw Fuse* | 4A 500V | 4A 500V | 1 |
Hexagon Head Bolt | M8-20 |
— |
2 |
Cuphead Squareneck bolt | — | M10X30 | 2 |
Nut | — | M10 | 2 |
Spring Washer | — | M10 | 2 |
Washer | — | M10 | 2 |
*Primary voltage 380V, 415V and 440v only.
Option
Extension Cable and Gas Hose
Cable Length | 5m | 10m | 15m | 20m |
XD350S (38mm2) | BKPT-3807 | BKPT-3812 | BKPT-3817 | BKPT-3822 |
XD500S (60mm2) | BKPT-6007 | BKPT-6012 | BKPT-6017 | BKPT-6022 |
Gas Hose | BKGG-0605 | BKGG-0610 | BKGG-0615 | BKGG-0620 |
Wire Feeder Control Cable | BKCPJ-0605 | BKCPJ-0610 | BKCPJ-0615 | BKCPJ-0620 |
Note:
-
No requirement of standard power cable (2m) when using extension cable.
-
Indicate the cable/hose length when more than 20m is required.
-
Use high power cable for mechanized system or high current application.
In accordance with DAIHEN’s policy to make continuing improvements, design and/or specifications are subject to change without notice and without any obligation on the part of manufacturer.