Submerged ARC Welding (SAW) has been recognized as the best process for high deposition, radiographic quality welding at minimum cost. SURARC XRCP SAW welders are ruggedly built, low maintenance, high performance machines which can take welding productivity & economy to new heights.
- Tractor speed :0-2 m/min
- Tractor dimension: 535 X 465x 220 mm(LxWxH)
- Mechanical clutch for manual movement
- Tractor input voltage: 40V
- Horizontal Slide: 150 mm (stroke)
- Vertical Slide: 150 mm (stroke)
- Head swivel: 315 °
- Head Tilt : 45 °
- Drive: 4 Rolls
- Wire dia capability : 2.5- 6.3 mm
- 3.15, 4 mm Contact Tips supplied as Optional
- Hopper Capacity : 10 KG
- Welding voltage, current & Tractor speed meters
- Auto/ Manual switch for Tractor
- Forward/ Reverse switch for Tractor
- Stepless speed variation of Tractor
- Stepless wire feed variation
- Stepless creep feed variation
- Wire inch up/down switch for accurate wire positioning
- Auto change over from creep speed to main speed
- Weld/Tractor start/ Stop push button
- Power on/Weld on lamp
- Control panel input voltage: 110 V
| Input |
XRCP-1200 HD |
| Rated Input Voltage (V) |
3ph,415 V, 50 Hz |
| Rated Primary Current |
75 |
| (max)(A) |
54 |
| Rated Input Power(max) (KVA) Rated Welding Current at 100% Duty Cycle (A) |
1000 |
| Output |
|
| Output Current Range (A) |
240-1200 |
| General |
|
| Insulation (Class) |
H |
| Type of Cooling |
Forced Air |
| Dimensions(LxBxH) (mm) |
1100 x 930 x 1260 |
| Weight (Kgs) |
435 |
- XRCP 1200/1200 HD Power Source
- Head & Control panel
- Tractor
- Track- 3.5 m (Available in 3.5 M section and can be joined end to end)
- Power Source to Head Input Cable Assembly -15m(Welding & Control Cable)
- Ground cable assembly with lug- 5M
- Other lengths also available on request
SAW is a powerful automation tool for heavy fabrication of large components. Fixture mounting type welding heads can be supplied which can be mounted on Boom, Side Beam Carriage, special fixtures etc.
